As the safety lanyard is continually put to use regular inspection at reasonable intervals should be conducted by involving a designated competent inspector who is also independent and able to make impartial decisions for the purpose of maintaining safe functionality of the lanyards, damaged lanyards can be destroyed or returned to the manufacturer hence the need to replace. The tests to be done can include pre-use checks, detailed inspections and interim inspections. It is advisable to go for quality materials that has been tested and inspected and proves that it can handle different weights and pressure to give safety assurance. The safety lanyard should be flexible, kept as short as possible to a free fall limit of not more than 4 ft. Lanyards that have met the outlined safety standards gives the user confidence that the manufacturer is committed and is careful to put into consideration all that is required for safety.
Lanyards are made with durable materials carefully webbed to produce a strong rope or strap with a sole intention of providing ultimate protection and safety against fall from heights hence minimizing hazards when working at a site. Safety lanyards can be presented in two ways they can either be energy absorbing, this has an inbuilt device to reduce impact incase of a fall, the second one being a non-energy-absorbing. The quality of the material used to make lanyards is the determining base factor; this can range from canvas, cloth, vinyl, wire or synthetic fiber which is woven to meet the intended use. Further to the quality of the material, the user has to ensure that the lanyard is in perfect condition before use therefore, maintenance of the lanyards is of key importance at the same time putting into consideration the degradation factors like chemicals, cuts, girt, dirt, surface damage and wear and tear.
As the safety lanyard is continually put to use regular inspection at reasonable intervals should be conducted by involving a designated competent inspector who is also independent and able to make impartial decisions for the purpose of maintaining safe functionality of the lanyards, damaged lanyards can be destroyed or returned to the manufacturer hence the need to replace. The tests to be done can include pre-use checks, detailed inspections and interim inspections. It is advisable to go for quality materials that has been tested and inspected and proves that it can handle different weights and pressure to give safety assurance. The safety lanyard should be flexible, kept as short as possible to a free fall limit of not more than 4 ft. Lanyards that have met the outlined safety standards gives the user confidence that the manufacturer is committed and is careful to put into consideration all that is required for safety.
0 Comments
Leave a Reply. |
Write something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |