There are numerous safety rules that should be employed whenever one is using the fall protection straps. First of all, the user must ensure that there is enough clearance to prevent them from striking the ground surface. The clearance can be described as the distance between the feet of the victim and the ground surface after a fall has been arrested. The recommended clearance is usually 1 feet high. However, this height may vary depending on the type of lanyard connected to the protection strap.
It is equally important to consider the height of fall when using the fall protection straps. The straps are only meant to prevent a falling force of about 4kN. Therefore, the maximum height that the user falls should be less than 6 feet. The weight of the user is also restricted below 300 lbs. This includes the total weight of the protection gear that the climber is wearing and the tools that they are carrying as well. The firmness of the support structure also matters a lot when talking of safety straps and lanyards. The straps should be clipped to a support that is strong enough to hold the weight of the climber and the amount of shock experienced.
Using any kind of safety fall equipment requires one to have a proper understanding of various tools and accessories. It is obvious that one should also have a proper understanding of the fall protection straps before using them for various purposes. Proper training is therefore required prior to the exercise. One can also rely on the user manual that comes together with the equipment from the manufacturer. However, this only applies to those who already have some basic training about the use of various safety fall equipment.