• Blog
  • About
  • Contact
  • Blog
  • About
  • Contact
Variety Blog

How to Deal with the Common Quincy Air Compressor Repair Issues

8/29/2019

0 Comments

 
Picture

Air compressors are a powerful machine which are used in almost all applications, from auto mechanics shop through to large manufacturers. They are heavily relied upon for heavy-duty tasks and thus require regular maintenance to guarantee proper operation for the business needs. However, any kind of equipment, with no exception to your Quincy air compressor, may encounter some failures from time to time. Whether it’s a problem with the motor, pressure or lubricant, your Quincy air compressor parts have to be fixed promptly before they turn into a major, costly headache. Here are the common problems which are known to happen with air compressors. 
 
Air compressor will not work
When your compressor won’t work, it can be caused simply by a basic issue or oversight. Fortunately, these operational problems are the easiest to diagnose and remedy. The possible causes are: no power, lack of oil, pressure disparity, power switch failure. Quincy air compressor parts that aren’t functioning properly can be remedied quite easily. When it lacks electrical power, just check the power button or the breakers. Also reset the switch, when necessary. Sometimes, it might be due to a nearly empty oil tank that has to be replenished. Another reason could be because of tank pressure being too low in relation to cut-in pressure. In this case, the pressure switch has to be replaced with one that has a lower cut-in.
 
Oil does not last long as expected
Every compressor requires oil to operate properly. When you have operations where oil runs out too quickly and needs constant replacement, it can be caused by the following reasons:
 
  • Oil leakage - this can be avoided by tightening the relevant machine components or by replacing oil gaskets.
  • Improper viscosity - once the oil viscosity is off, it’s the right time to drain and refill.
  • Intake obstructions - this is due to the blockage at the air intake that calls urgent cleaning of filter or worse, replacement.
  • Piston rings is worn - once the piston rings are worn, it is best to replace them instantly. 
 
It produces too much noise
When your piston air compressor makes a loud noise which is not normal and quite out of character, it may be due to loose internal parts such as pulleys, clamps, belt, cooler, etc. Other noise culprit is a defective crankcase that may need new oil or bearings, or an outright replacement. Excessive noise also happens when the piston hits the valve plate. In this case, check for any dirt by taking out the cylinder head. Once you’ve addressed the issue, simply replace the gasket and reattach the head. In several cases, this particular Quincy air compressor parts problem is an indication that something is wrong within the unit. It is best to solve this issue earliest before it becomes a major problem.
 
Air Energy do not just provide the best Quincy air compressor repair service, but also offer you with the kits and tools needed to perform preventive maintenance and repairs should you want to fix issues on your own. But for more complex problems, you can trust our expert teams to remedy them quick and effective. 

0 Comments

Important Things to Know About Fetal DNA Testing

8/29/2019

0 Comments

 
Picture

With the advancement in modern technology, it has become a lot easier and safer to know the condition of the babies even before they’re born. Not to mention that the new method gives much more accurate results than the conventional ways. It is called as the prenatal cell-free DNA testing that collects a blood sample from the mother that carries some traces of the genetic information about her unborn child. This fetal DNA testing is a non-invasive prenatal screening method or also commonly called as prenatal cell-free DNA screening or cfDNA.
 
The primary purpose of fetal DNA testing is to tell the parents of the likelihood that their unborn baby may have some chromosomal disorders like trisomy 13, trisomy 18, and Down syndrome. It can also be used to look for any sex chromosome abnormalities. When it comes to the accuracy of the test, it actually depends on the condition of the specific abnormalities being tested for. However, the results of cfDNA testing is considered to be more accurate than the traditional testing methods. 
 
If you choose to undergo this test, you can usually get the results within two weeks at the maximum. A positive result means the baby has an increased chance of having a certain abnormality while a negative result indicates otherwise. Pregnant women who has taken this test usually receive definitive results which help them plan for the next steps based on the result itself.
 
A fetal DNA testing is available for expectant mothers who are at least ten weeks pregnant and is best for singleton pregnancies that are at a higher risk for chromosome abnormalities. It can either be due to the age of the mother, that’s at 35 and above at the time of delivery, or to the abnormal findings by other screening methods, or a previous pregnancy diagnosed with the same abnormality. While this test involves simple steps, it can get complicated still so it helps to discuss it with a physician or a prenatal genetic counselor that can help you in your decision-making. 

0 Comments

Intriguing Facts About The 3 Famous Artists

8/29/2019

0 Comments

 
Picture
The history of art is so rich that it is quite challenging to know which stories are true and which ones are myths. Some of the stories are somehow questionable but that is because many still believe in false accusations and accounts that pertain to famous artists. If you are attending a Toronto art school or still in the process of looking for one, here are some intriguing facts about the three famous artists.
 
As Documented, there is Only One Painting Sold by Vincent van Gogh
Popularly known as the greatest post-impressionist, van Gogh was known to sell one of his amazing masterpieces – "The Red Vineyard at Arles.” He sold this painting because he committed suicide back in the 1890s. He sold the said painting also to a painter named Anna Boch which was authenticated. However, scholars believe that this is not the only painting that van Gogh had sold when he was alive as evidenced in his letters. These alleged paintings were sold to his relatives prior to selling his famous artwork to Boch. This issue is perhaps tackled in a Toronto art school or totally skipped.
 
Pablo Picasso Had Allegedly Stolen Mona Lisa
This is, of course, purely an accusation. It was based on the fact that Pablo Picasso and his friend were found guilty with the possession of Iberian sculptures that were stolen from the same museum, Louvre, where the famous or infamous painting of da Vinci, Mona Lisa, was kept. Unfortunately, it was the same time when the painting was lost and so Pablo and his friend were accused to be one of the thieves. But
due to lack of evidence, they were released. The truth is that someone else had stolen Mona Lisa
painting in an attempt to bring it back to Italy.
 
Procrastinating Is One of Da Vinci's Traits
The contribution of Leonardo Da Vinci to art is unquestionable as every Toronto art school would purport. He is an art genius but just like you and me, he is also a person with some undesirable traits. He was deemed to be a procrastinator who got distracted so easily. It was through him where the Renaissance was attributed but it is quite interesting to note that he did possess an undesirable trait of leaving his work undone. This procrastinating was confirmed through plenty of unfinished sketches and artworks he left behind after he died. His most famous masterpiece, Mona Lisa, took 14 long years for him to finish. 
0 Comments

Why CWB Welding Standards Are Sought After

8/29/2019

0 Comments

 
Picture

Just like their whiskey standards, the welding standards in Canada are very similar to that of the US’ standards. The major difference being the fact that in Canada, there is a third-party involved to carry out the verification process which is done by the Canadian Welding Bureau. It only means that when a company is CWB welding certified, the qualifications of their welders are verified by the said bureau.
 
So, what are these Canadian welding standards really that make other companies, even in the U.S., wanted to be CWB welding certified? The welding standards include having welding done by qualified welders, supervised by competent professionals, and adhered to the proven welding best practices.
 
If a company is CWB-certified, it means their welders are fully qualified every two years in terms of their welding skill level, dexterity, and visual ability to perform welding tasks. The test for these qualities are usually done in the company’s place and witnessed by somebody from the Bureau. In the same way, CWB welding supervisors are tested and assessed by the Bureau to make sure that they are experienced enough to supervise welding operations of the company. In general, any company certified by CWB must have one welding supervisor at the least.
 
Moreover, CWB welding standards also cover the procedures performed by the company, ensuring that the quality of the weld is never compromised. As such, the Bureau provides comprehensive standards pertaining to every welding operation such as preheating, equipment settings, handling base materials, heat input, and so on. All these CWB welding standards must be kept in a data sheet that is submitted to the Bureau to ensure that your parameters adhered to the said standards. All the benefits of CWB requirements will make all the parties happy because they will be updated on the welding procedures that have been certified and approved by the Bureau. It means the welded products are high-quality and meet the stringent standards of CWB. 

0 Comments

Appliance Repair in Toronto

8/29/2019

0 Comments

 
Picture

You may not know it but your refrigerator may not be working properly due to an electrical issue in your home. Perhaps, it does not produce ice cubes that efficiently anymore. Perhaps too, it does not cool that much just like before. Your washing machine might be acting up every now and then. All these are telltale signs that your home needs a visit from our residential electricians in Toronto.

A qualified electrician is what you need if what you want is a cheap repair but an efficient one. In case your home’s electrical system is in need of maintenance, the most important thing to do is to make a call to the best residential electricians in Toronto before the damage gets worse.

What Are the Reasons for Seeking Electrical Maintenance?

There are many things that can happen to the electricity source that powers your major appliances. However, the ones that you cannot handle by yourself are the ones that you should let us handle. Besides, it is better to always consult with a professional if you do not know anything about fixing a dangerous element like electricity. Otherwise, you might just add to the damage. Or worse, cause bodily harm.

Here are some good reasons why you will need residential electricians in Toronto:

  • Clogged coils for your refrigerator – The fact is that if your refrigerator is not cooling, then there might be a buildup that is causing the compressor to heat up too much. The overheating then triggers the overload switch.
  • Your gas stove igniter is not functioning – In case your electric stove burner does not heat up, there must be a problem with its igniter. In any case, a tighter electrical connection is needed.
  • Electric oven controls don’t work – If your oven does not heat, the problem could be with the electrical power source. If the problem does not involve the clock and timer setting, then it could actually be worse.
  • A noisy washer – When a washing machine cabinet keeps on making a noise during the spin cycle, it is a cause for repair. If you tried readjusting the legs and making them solid on the floor and it still does not work, then you will need professional to see if it’s an electrical problem.

We provide you with electrical maintenance, inspection, and upgrades. You deserve the best so we are here to give you just that. If your household appliances are acting up and starting to give you a headache, give us a call. 

0 Comments

Industrial Adhesives and Structural Epoxy from Invertech

8/28/2019

0 Comments

 
Picture

We are proud to offer you our wide range of industrial grade adhesives and structural epoxy. We are well aware of the fact that every industry and product is unique, and that the adhesives and structural epoxy that is used reflect these changing needs.
 
Because we know this and we want to offer the best products possible we worked hard to make sure that we have products that can meet your needs the first time and every time.
 
To reflect our commitment, we offer a wide range of products that are designed to meet your needs. Just come to our store and we are more than happy to offer valuable advice to make sure that you get the products you need quickly and efficiently.
 
Heavy Lifting
 
Our products are designed to bear loads of such magnitude that they can be considered award-winning products. They will ensure that your project will stay intact thanks to the strength of our structural epoxy even if they are exposed to intense pressure.
 
Contact Cement
 
Contact cement is a two-component solvent type adhesive which means that the two ingredients must come together before they will begin to work. Once joined, the contact cement will form multi-purpose and multi-substate bonds which can be used in all possible environments.
 
Structural Adhesives
 
Structural adhesives are designed with medium cure speed, high strength and high viscosity. This is perfect for situations where the structural adhesive has to bind with two or more different types of materials. Hence, we provide top quality Structural Adhesives that will get the job done in a cost-effective manner.
 
Conclusion
 
Just as a quick recap we offer two different classes of Industrial Adhesives. These are:
 
  • Contact Cement
  • Structural Adhesive
 
Contact Cement dries faster but Structural Adhesive is stronger. So feel free to choose the correct adhesive that will meet your business needs. We are more than happy to assist you with your adhesive needs. 

0 Comments

Eberle Bandsaw Blades: Top Quality Products

8/28/2019

0 Comments

 
Picture
Eberle is known for its high-quality products both in industrial and technological purposes. It is the most trusted company that takes pride in band saw blades along with band saw parts such as strip steels.

Its History and Origin

The company has been established in 1836 and even up to date, they are still sticking to their commitment to producing the first class strip steel products and top quality band saw parts. Eberle believes that quality management will help them keep their position in the market. So, they invest so much in making sure that each product they deliver surpasses the customers’ expectations. The satisfaction they provide the customers lead them to where they are now.

Going Global

Eberle has different partners worldwide that help them remain the best in the industry. They have partners in Asia like Japan and South Korea as well as Aarhus in Denmark. They also reached Alberta and other states in America. All of them specialize in saw blades, and they can help you with the right band saw parts that you need. For a quote, you have to tell the details like the band saw machine, blade size, what material to cut, and what type of cut you are doing.

Constant Innovation

Eberle has been developing their customization products all throughout the years. They earned the customers trust by doing everything that the customers want and needs with the most intense study and development. Since individuals are different, they also believe that customers’ specifications differ as well. So, what they do is they tailor band saw parts perfectly aligned with the customer’s demands. It does not matter if the customers want three materials in one strip, they will do it. They follow the customer’s preferences without compromising the quality of the standard they set in their products and services.

They promise a long-term commitment with their customers from the band saw parts and blades industry.   

0 Comments

Metal Fabrication and Laser Cutting at 4 Way Metal

8/28/2019

0 Comments

 
Picture

We take pride in giving you the best metal fabrication and laser cutting in Ontario. We give our customers the best fabricated metal products. These techniques involve a lot like shearing, punching and sawing. We strive for better customer service all the time.

We provide our customers with the best laser cutting services. We bring you quality work in every finished product that we make. When it comes to custom laser cutting in Ontario, we use the best state-of-the-art machinery in order to make sure that our clients’ specifications are strictly followed.

What Are the Benefits of Working with Us?

Metal fabrication and laser cutting is the process that is used to provide all metal works from bridges to metals in posts and concrete. It is also used in the production of many metal products, tools and huge machinery. Meanwhile, here are some benefits:

  • Efficiency – We provide our clients with the best turnkey designs because the custom metal components that we use are of the highest quality. We also employ the most efficient assembly of parts that make our fabricated metal products the most superior in terms of quality.
  • Savings – If you use fabricated metal products, you can save on labor cost and materials. We give you the best solutions to deal with the best multi-purpose parts. We have the best team of technicians in terms of quality.
  • Tooling and Fabricating – We give you additional in-house tooling and fabricating in order to ensure that you get a complete component solution of our fabricated metal products. The best tooling and fabricating add to the efficiency of the metal products produced.

For over 40 years of giving the best laser cutting in Ontario, we have served a large diverse clientele and have given them the best solutions for all their needs across various applications. We give you the best CNC laser cutting procedure as well as other metal related processes such as powder coating. If you think we could help you with your metal fabrication needs, do not hesitate to contact us. 

0 Comments

Foam Screening Spline

8/28/2019

0 Comments

 
Picture
The foam screening spline is the key to fitting a screen onto a frame. It is what secures all window screens onto their corresponding frames. It is normally used in order to install screens of various types on windows as well as doors. A screening spline is essential to the perfect and secure fit of a frame on any door and window that you want for installation.

Screening splines are materials that are easy to manufacture with its polyfoam component when compared to vinyl and metal. Thus, it is the best choice for installing screens on doors and windows. Flexibility and versatility are just two of the many good distinguishing qualities of screening spline when compared to other types of screening splines.

What Good Things Can You Derive From Screening Splines?

Screening splines is the product of choice, and not necessarily the other types of screening splines. There is the rounded polyfoam spline that looks like electrical wires. There is the round EPDM spline that is made from rubber and is resistant to UV and corrosion. There is also the flat spline that has conveniently flat surfaces that protect the windows from environmental damage. Nonetheless, the screening spline stands out.

These are some reasons why the screening spline is beneficial.

  • Resistance to UV – As part of the high quality standards of the screen spline, it is resistant to UV and can withstand various effects of the weather or from other environmental hazards.
  • Easy Installation – A screen spline is actually easy to install and can provide high tolerance in terms of the levels of frames.
  • Durability – The product is made from a durable Polyfoam material that gives it security and longevity when it comes to holding and securing screens on doors and windows. This also explains the natural resistance of screening splines to expansion or shrinkage factors.
  • Easy to Purchase and to Work With – This is because a screening spline is as flexible as rubber and just like rubber it has tiny air bubbles that make it more flexible than other materials. It can also be purchased in various sizes and can actually be easy to work with even for beginners. Moreover, it can be used to replace old steel and aluminum splines.

Since 1983, we have given our best in providing you with the best polyethylene foams, pool noodles, and screen splines. We have a system that capitalizes on product quality and efficiency of production. We carry out hassle-free deliveries, efficient processing of orders and a consistent control system. Do not hesitate to give us a call if you need a screening spline. 

0 Comments

Our Finest Ceramic Blanket

8/28/2019

0 Comments

 
Picture
As we continue to refine our research and development team as well as our industrial convection oven facility, being able to produce the finest materials that give high performance results. Our ceramic enhanced industrial convection ovens continue to be the best in its category, and our continuous development has benefited us in providing the finest in the line of custom ovens in the country.

High Purity Ceramic blanket-
With the composition of alumina-silica materials the High Purity Ceramic blanket is able to provide low thermal conductivity. Very stable and insulating properties are key components to making them ideal for multiple types of thermal insulation and storage protection.

  • Ideal for electrical components and gadget storage where thermal shock and vibrations are the damaging factors
  • Covers a wide use of application due to its properties as a blanket, able to wrap or use as padding.
  • Usable in an industrial convection oven, for temperatures up to 2,300deg Fahrenheit / 1,260deg C.

Zirconia Enhanced Ceramic blanket-
With the addition of Zirconia to the alumina-silica bond this produces a unique result. Benefits of high tensile strength and minimal shrinkage are two of the key qualities. Stability is excellent under harsh vibrations and temperature changes or sweeps, making this more of an industrial application favorite.

  • Ideal for ceramic plates and textile factories as thermal shielding or backing in their industrial convection oven or high temperature processing facility
  • Chemical and Metal processing facilities, used as lining or secondary heat shielding on their melting pots and sections
  • Aviation and military applications: engine and heat protection, insulation or protection from thermal scanners and other weaponry
  • Aerospace: used in some applications for thermal containment and protection and on base structures that see high heat / thermal activity

With our effort in continuing to find innovative solutions to providing you the best product design, you can be sure that we will solve for your every need. 

0 Comments
<<Previous

    ​

    Write something about yourself. No need to be fancy, just an overview.

    Archives

    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    February 2019
    January 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    April 2018
    March 2018
    February 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    February 2016
    January 2016
    December 2015
    November 2015
    October 2015
    September 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    November 2014
    October 2014
    September 2014
    August 2014
    July 2014

    Categories

    All

    RSS Feed

Powered by Create your own unique website with customizable templates.