Various researches have shown that fastening lubricated fasteners have a significant reduction in the tightening torque. However, it is at times unclear how much this reduction in the torque ought to be. Scientists such as Thomas J. Glover have tabled the torque effects for both dry and wet fastening where a diversity of lubricants have been used. A fair estimate of the torque reduction when a threadlocker is used leads to an overall torque requirement of 75 percent of dry fastening. The 25 percent reduction is essential in creating a simplistic view of how much force you require when fastening a bolt without the threadlocking glue.
Although most tabled values on torque reduction associated with the use of various lubricating agents are fixed, no standard values have so far been assumed. Only estimates have been developed depending on a given fastener, therefore, the values of torque reduction will differ from one bolt to another. The innovative thinking on torque reduction has further been stretched by the adoption of the torque-to-yield approach, especially in designing fasteners on heads and basic capped bolts. The outcomes are also highly dependent on the tightening angle of the torque.
On the reverse thinking, loosening fasteners with caked-on threadlocker requires a comparatively higher torque than used when fastening it. The torque also differs from that used when locking the fastener in that the fastener may at times fail to loosen, no matter the force applied. This is because of the ballistic bond between the threads on the bolt and the nut as glued by the threadlocker.
Renowned for creating superior threadlocking products, Invertech Canada is home to the widest number of solutions for fastening your bolts. We have a comprehensive list of products developed through a rigorous assembly and testing process. For these and more, please visit www.invertech.ca