Tip #1: Unclogging the Spray Arms
Typically, the number one issue with wine glass cleaners is clogged spray arms. The clogging is usually caused by soap residue or scale buildup. The first thing to do is to remove the spray arms by turning counterclockwise and pulling them up. Then check all the holes for any clogs. You can use either a steel wire or steel cable to clear out the holes from debris. Alternatively, you can opt for a wire hanger to unclog the arms. It depends on which one you find most suitable for unclogging the holes of the spray arms.
Tip #2: Bathing Spray Arms with White Vinegar
This next step is to further ensure that the spray arms of your wine glass cleaner is thoroughly clean. Soak them in white vinegar to breakdown any remaining soap and scale buildup. You can do it by using a cookie sheet or placing the spray arms in your clean kitchen sink, soaking them in white vinegar.
Tip #3: Cleaning the Interiors and Bottom of Your Machine
While dishwashers do clean the dishes and wine glass cleaner equipment tackle crystal-ware, they can get dirty, too. A regular monthly check of looking in the inside of your machine is not too much to do. Check the bottom for any debris. You will see the coarse filter that may be clogged with big particles, preventing the tub from properly draining. Next, you need to remove the cover of the drain reservoir and take out any mucky debris. It can be yucky but doing it may prevent further buildup.
Tip #4: Cleaning the Seals
Use a toothbrush in doing this last step. If you haven’t clean the seals of your wine glass cleaner for a year or so, they can really look disgusting. Scrub around those rubber seals as well as in the perimeter area where the door meets the tub. Do the same for the soap cup and the sides of your wine glass cleaner. And then finish up by sopping up the loosened muck with a wet sponge.
After doing all those steps, you deserve a pat on the back by doing a job well done.