The best-fit conveyor rollers for a manufacturing process will significantly aid in reducing costs. They must be sturdily made to ensure that it’s the right conveyor roller that’ll provide savings.
- Know the load
What will you load on the conveyor rollers? Take the time to make a studied assessment if the requirement is for flat bottoms such as cartons or drums. Based on the load, you might need to choose a conveyor with gravity rollers. Knowing the weight is vital as that is the first thing that you should know when selecting the right conveyor roller.
- Size and contact
It takes careful study of the load and the load conditions to determine the required conveyor roller size. If the weight is heavy, the rollers should be large enough to meet or exceed the load for each roller. If the loading has an impact, a heavy gauge with large tubing might suit the requirement. The typical load-to-contact must be in place. This requirement for three rollers in contact with load can happen with proper spacing.
- Conveyor roller material
The materials used to make conveyor rollers are either aluminum or steel. There are conveyor rollers made from both of these materials. For light, fast, and easy installation, aluminum rollers are the choice to make. If the application requires durability, the alternative would be to use steel rollers.
It is also a good idea to assess if the best fit for the specific application would be light aluminum rollers that have steel end caps. These conveyor rollers that have a combination of materials aid cost reduction by lessening the raw materials required. Also, take into consideration if the setting of the conveyor roller will be high or low when selecting the right one for your application.
By knowing these four factors, you will be able to choose the best kind of conveyor roller for you.