Simple maintenance tricks to prolong the life of your air compressor
- Ventilation – is critical to the efficiency of your air compressor. Most air compressors are located indoors in a centralized compressor room to protect it from the environment and to maximize floor space but adequate ventilation must be ensured. Compressed air systems that are subjected to extremely high temperatures can experience unscheduled shutdowns with the necessity for more frequent maintenance. It is always important to plan for the right location where the air compressor can get the best ventilation at the same time that there is easy access to maintenance to avoid Quincy air compressor repair.
- Know your environment – one of the most common mistakes when planning for an air compressor is the failure to evaluate the immediate environment. Air borne particles in the environment will have an effect on the quality of compressed air. If the air compressor is located in a clean environment with low dust and debris, it will not require much more than standard maintenance. It will also reduce the need for Quincy air compressor repair and replacement of moving parts. A proper evaluation of air quality at the time of installation will help prevent any premature failure.
- Evaluate the need for air dryer – moisture in compressed air is responsible for costly problems on the system. Moisture results in the most common enemies of the compressor system that includes corrosion, scaling of the pipelines, clogging of instruments and freezing of outdoor compressed air lines. Should any of these situations occur, the option will be Quincy air compressor repair to avoid downtime. Compressed air dryers would help reduce water vapor concentration and prevent water formation in the compressed air lines. Dryers are as important as air intake filters, aftercoolers and automatic drains in ensuring the efficiency and productivity of the compressed air system.
- Importances of aftercooler – aftercoolers are heat exchangers that make use of either water or ambient air to cool compressed air. Aftercoolers also remove at least 60% of moisture content in the air and helps ensure that air temperature in the piping system do not reach a hazardous condition. Just as cool air is important for the air compressor, clean cool water is also critical to units that are fitted with water-cooled heat exchangers. There are usually manufacturer requirements on the water conditions that must be met including flow, pressure and temperature. If these requirements are overlooked, it is very likely that the efficiency of the compressor system will be compromised. Once unusual conditions are identified, the best option would be to call for Quincy air compressor repair to provide the right cure to the system.